USB flash drive-gum
Tired of friends and colleagues constantly asking you for the stick, and then, of course, it does not give? There are a good option to disguise it. Just 10 minutes and your stick will look like gum. Of course, there is the possibility that you will have to ask for gum, in this case you should admit that you’re a greedy bitch. Or just get a spare gum.
1.Make
Obviously, you’ll need a USB. For a new «cover» you also need cardboard, approximately 4 inches by 4 inches. Strange, but you will also need a pack of gum!
2.Cut
Well, now you have the necessary materials and you can get down to business. Put a pack of gum to the cardboard and trace it with a pencil. Now put down the package and using a knife cut the sketch.
3.Crop
Now you have the blanks made of cardboard. Then you need to properly open a pack of gum. No need to open it along the contour, which offers you the manufacturer. Arm with a knife. Put it on the USB packaging, measure the required length and carefully with a knife cut a part of the package, which in the future will be cover for the stick.
4.Cut
Now cut a piece of cardboard blanks. You must measure the length of the cover to the stick and trim the required quantity of cardboard.
5.Install
You can’t just shove the USB between the cardboard so you have to use a knife to cut out a necessary place to stick. Cut off the top layer of cardboard and then put the USB in the hole. Now scrapie glue the two sides of the cardboard together.
6.Insert
Make sure that the size of the carton correspond to the dimensions of the package of gum. If the cardboard won’t fit in the pack with a knife cut off the excess.
7.Cheers
Shout with joy. Now you have the original stick and the bunch of unnecessary gum.