A durable plane with their hands
In your fifth point again played the childhood? We know how easy it is to eliminate this itching. We offer you to make a great and durable plane. You will spend only 15 minutes on the production, but will receive a mountain of happiness. This toy will definitely come in handy if you have small children or nephews. So let’s get started.
You will need:
- glue gun;
- ties (optional);
- BBQ sticks;
- hard cork wood;
- stationery knife;
Prepare the bar with a width of 2.5 and length of 20 inches.
Cut the wing about 7 cm in length and 3 cm in width at the widest point.
Make a longitudinal incision in the center of the wing as shown in photo.
The resulting crack pour hot glue.
Now wait until the glue is dry, just try to keep the wings at an angle of 5 degrees.
Next, take the glue gun at the top of the bend of the wing.
Tape my fuselage to the wing.
Now make the tail. You’ll need two parts from foam: one of them must be of length 7.5 cm and another 10 cm, both 2.5 cm wide
Now glue them as shown in the photo.
Stick the tail to the fuselage.
Cut 12.5 cm of tape and attach to it 8 staples. This is necessary in order to add weight to the nose of the plane.
Now this tape to stick the nose of the aircraft.
If you want to fix the result, you can use a screed. Maybe you are there.
Well, that’s all. Tenacious your plane is ready! Can take children or friends to go to the Park to throw a good offload after a hard Monday.