How to choose the right weight of jig head

Being on the water, in front of the fisherman very often the question arises, what weight jig head would be more correct to apply. Experienced fishermen will detect it very quickly. Even in a new place, after a couple of changes to the weights, choose the desired snap-in will not be easy. However, for beginners in spinning fishing, this moment is quite difficult.

So what you need to consider when choosing the right weight head jig and what factors influence it?

First, the weight of the jig mounting affects the casting distance, the chosen of the cargo affects the quality of the bait on the bottom. From how correctly chosen head depends on the sensitivity of the transaction, and how it can be controlled.

According to many experienced anglers, the weight of the cargo is in each case need to be used more than the minimum. The less the weight of the jig, the slower sinking bait on the pause. The slower Tony bait, the more natural looks of her playing in the water and the likelihood that a predator will notice it will increase significantly. The likelihood that the bait for something to cling to, with low weight of the jig, the load is also minimized, while heavy jigs cling quite often.

If the place chosen for fishing has a maximum depth of two meters, for fishing you can use Microdrive rods. This spinning is usually used jig head weight no more than two grams. In that case, if increasing water depth, or increasing the current, you must increase the weight of the load. Experienced fishermen know that in order to efficiently do the wiring the bait along the bottom at a depth of say six metres and under water three meters per second, it is necessary to use a jig weighing not less than thirty, and even fifty grams. The depth of the reservoir in three to four meters, can be successfully used jigs weights no more than fifteen grams.

Rules for the selection of jigs

When choosing jigs there are a few immutable rules.

1) the more the depth of the reservoir where fishing takes place is, the heavier must be the burden.

2) the weight of the load also depends on the water flow, the faster the water, the heavier must be the jig.

However, all these rules are conditional, selecting the right tooling it is possible only to the extent that, as will be fishing.

It should be remembered that the sense wiring jig head through the rod, is greatly influenced by the vehicle spinning. It matters what kind of fishing line or cord is used, and even used sites. The feeling of provodki jig will be completely different when fishing in waters with a sandy bottom and clay will also be a completely different feel to the muddy bottom or rocky. Depending on the structure of the bottom of the reservoir, the weight can fluctuate a few grams.

Exceptions to the rule when choosing jigs

However, despite all the rules, there is always a few exceptions to them.

1) obviously increased the weight of the load. Fishermen often inflate the weight of the jig head if there is a need to throw the bait at a farther distance. Usually this method is used when fishing from the shore, as if to catch from the boats can come to almost any desired location.

2) this situation is a little not standard. This technique is usually used when fishing for large or medium compositions, twisters or crayfish, sometimes when you use vibrohvosta. In this case, deliberately increase the weight of the load, sometimes even three times in order to stepankovo providce to create a seismic similarity when hitting jigs on the bottom. After a short pause, made a sharp jerk and another shot. From hitting the bottom increases turbidity, vibration of water that covers a decent distance and attracts fish even at a distance from the place of fishing.

When choosing goods, it is necessary to consider what weight is the bait. Very often when using natural baits weighted load is not used at all. If the load is still present when the choice must consider not only the weight of the load, but Igor installation. You must also take into account how parasit in the water Silicone bait.

All described concerns only a single jig installation, such as rigging a drop shot, a discharge leash this does not apply, because the use of such tooling is used deliberately large loads.

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: