Fishing on the Donk

Donka has many advantages over the float rod. It is easy to manufacture and to use and transportation. It consists of any length of fishing line, sinkers and one or more hooks. Before using the donkey on the shore and need to make a stand. It is made of any, preferably not dry brush. This stand is designed to soften the jerks of the fish when biting.

In order to determine the necessary bite on the fishing line to hang the bell. The thickness of the main fishing line choose like this, so she doesn’t get confused and cut hands. Usually it is of a thickness of 0.5-0.6 mm. the Length of primary scaffold is selected depending on the place of casting. If the casting is clean, no grass and bushes, the length should be 40 – 50 m.

Of great importance sinker. It is moving or tied to the end of the line. With cargo’s easy to throw fishing line and keep it near the bottom. Currently applied to the load-feeders, which laid solid foods.

Now, instead of racks began to use spinning rods with a reel. With their help it became easier to cast and get the fish.

ROD

Fishing rods are divided into 3 types depending on the weight of the equipment. The easiest is the rod has a length of 1.7 – 2.5 m, and need to catch them in still water. On this rod are fastened the thin snap-in. The second type is the rod, which is heavier weight the batter. This rod should be a length of three to three and a half meters and rigid system. Such rods are used interchangeable nods, which should have a different stiffness. Such nods and allows you to catch small and large fish. With nod you can easily identify the bite, usually the tips of nods dyed in a bright color. The third type is the most powerful (rod for feeders), they have to be durable enough to withstand long casts with feeders. At the same time they must be sensitive and soft. Feeder rods should be 3 to 4 m.

SCAFFOLD AND RIGGING RODS FOR BOTTOM FISHING

For bottom fishing is best fit line with a low stretch and a high breaking load. The best equipment options of rods there are three types. First – when the snap-in with sliding cargo. Second, when a rolling load is on a separate leash, and the third is the snap – in hinge. If you apply a snap with a moving load on a separate leash, it will not tear when you hook the rest of the gear and such equipment can easily change the load or cargo is to put the feeder. On long casts, the snap-in is used with loops. It is used on lakes and rivers. This is considered to be the best, because when casting it is not becomes confused and flies away.

Понравилась статья? Поделиться с друзьями:
Добавить комментарий

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!: